JIC NEMA 4 (STANDARD), JIC NEMA 4, 7, 9 Explosion proof
Others Housings available upon request.
Standard Features:

std. linearization of all transducer calibration curves to .05% FS
12 bit linearization-output step size 0.02% FS
switching power supply for all internal voltages for
minimum heat generation and maximum efficiency
test socket for all critical voltages
4-20 MADC isolated output
all input & output are EMI conditioned
all lines are protected from external RF radiation from communication radios as well as providing full protection against transmission of internal signals

• 926 Calibration Check Procedure
• 926 Wiring Diagrams
• 926 Instruction Manual

Flow Rate Display
Vacuum Fluorescent or LED numbers and engineering units legends


Flow Totalizer
8 digit readout
30 days backup battery for count

Totalizer with pulse output
normally +12 VDC @ 30 milliseconds standard, options are +5, +24 VDC etc.
as well as NPN transistor open collector

Batch counter
Alarm Outputs
Hi/Lo set points
Dual Range/Dual Fluids
Dual range is taking one flowrange and dividing it into two separate flowranges
for the 4-20 MADC output, switch selectable
Dual fluids is one transducer calibrated for two fluids, switch selectable

Temperature Range
-40°C to 70°C without display
-20°C to 70°C with flow rate or totalizer display

110v AC; 220v AC @ 1/2 Amp; 24v DC @ 1 Amp

Isolated Output
Current 4 to 20 milliamps
1000 ohm (maximum load
voltage 0 to 10 MV
0 to 100 MV
0 to 5 VDC
1 to 5 VDC
high impedence load
power is supplied by internal 30 volt source